Any coffee-based beverage is only going to be as enjoyable as the beans that are used to make it. If you don’t already, you will need to source high-quality, whole coffee beans and drink enough coffee to make sure that those beans aren’t going stale. You can use any beans that you like, but small batch and single-origin coffee beans are going to make a world of difference over bulk and mass-produced coffee beans.

The design of the Giga 5 is beautiful, and the clean lines running up and across the unit make it modern and sophisticated. Due to the fact that the Giga 5 has two grinders, pumps and heating systems, it produces a good amount of internal heat. Jura solves this problem by automatically diverting the heat and steam away from the machine via the visually appealing “venti ports,” which in turn provide fresh air into the system.
This machine makes the best coffee I've ever had! No more high priced Starbucks! This is quality coffee/espresso for a fraction of what he cost! Let's do the math......a caffe latte = $4.25 from Starbucks. Let's say you buy one everyday on your way to work. That's 250 lattes a year@ 4.25= Approximately $1100 a year!! Buy an all in one Jura capresso machine and it pays for its self in less than a year! These very well built and made to last! My wife and I absolutely love this machine! This machine is over a decade old and still works like brand new! Add beans water and out comes the best cup of java you will ever have!

This is made to order coffee, not the stuff sitting in the pot for hours on end. You might argue that the coffee shops grind their own coffee. And they do, but not for every cup (otherwise a $4 cup would be history for sure) and this is the main point. Their ground coffee is still sitting around exposed to air and going stale. The stuff in their pot or thermal tank just sits until empty.
When prompted by the machine that it’s time to clean, find the “clean” option under the various cleaning programs and be prepared to follow the instructions it gives you. This is usually as quick as emptying the grounds tray and pressing the rotary dial one more time. Please a cup or jug under the spout to capture the cleaning waste that will be dispelled from the machine. You will hear the machine perform an initial rinse, and then prompt you to add the cleaning tablet which will be inserted into the pre-ground coffee compartment. After another push of the rotary button, the machine will go through an approximately 20 minute cycle so you’ll want to do it when you have a bit of time.
The ENA Micro 1 is the simplest of all of Jura’s machines. It is the smallest machine on the list, the most affordable, and packed with the base technologies in Jura’s machines. Your beverage begins by grinding whole coffee beans in a multi-level grinder, which are then pushed through a micro brewing unit. The machine delivers a rich espresso, with a soft layer of crema on top.
1) After much research, I purchased the F9 at Williams Sonoma, primarily because they used to have a policy that you could return anything, at any time, if needed. So, I figured that if ever I had an issue, I could just return it to my local Williams Sonoma and get a replacement rather than returning the machine to the factory and waiting. Turns out I did indeed have to do this once for an electrical issue, which was actually an issue I had with the wiring at the outlet--not the machine afterall! In any event, I don't think Williams Sonoma still has that same open-ended return policy. Be sure to research the return policy wherever you make your purchase!
The speed at which the Jura ENA Micro 9 delivers coffee is amazing. Before you know it, the chrome accented spouts are delivering hot espresso that absolutely tastes as if it was prepared by skilled human hands. The design and casing look great up close and feature a hard plastic with a matte silver finish. The top of the unit is a shiny black that’s reminiscent of Lucite and is easy to quickly wipe down and keep the machine looking fresh. We were also impressed with the density of the foam that the Micro 9 delivers. We considerer ourselves experts in the area of good foam and we were not disappointed with its dense and thick mouth feel. The adjustable spout creates clearance for any size mug or large cup and the multi-level sealed conical grinder performs just as well as any standalone grinder we’ve ever owned. Overall, ENA Micro 9 strikes that perfect balance between size, power and delicious coffee. This is currently our favorite model and the one we have in our own home.
Whatever you’re into, the Impressa F8 has a coffee for you. While it’s great for the common choices like espresso and americano, it’s just as capable of serving up a macchiato too, or pretty much anything else you can think of. Of course, the more skilled you are as a barista, the more experimental you’ll be able to be, but if you just want something easy, stick with the 13 preset programmes and enjoy what Jura’s experts have created for you in advance.
The buttons of the Jura XS90 can be easily programmed for setting volume, strength and temperature of the espresso dispensed. If you take a closer look at the right side of the XS90, you’ll notice that the multi function button is perfect for programming the lattes or cappuccino, including the strength and amount of milk, but also the temperature of espresso dispensed. If you want, then you can even adjust the milk’s foaminess.
Most modern coffee machines will feature a foam frother and this is also a vital part of a coffee machine like the Jura C65. The majority of users actually require this feature in order to make tasty lattes and cappuccinos. The good news is that the Jura C65 does indeed feature a revolutionary fine foam technology that ensures the milk has lots of foam. On top of that, the coffee spout’s height is adjustable, so you can easily fit a wide range of cups ranging from sixty five millimeters and up to one hundred and eleven millimeters.
×