The Capresso EC100 offers you the chance to get creative and add variety to your coffee drinks, not only with espresso shots but also with lattes and cappuccinos using this espresso machine's two-part frother. This espresso maker comes with a frothing sleeve that lets you swirl hot steam and air into your milk to make a rich and foamy topping for your cappuccinos. You can remove the frothing sleeve and use the underlying steam tube that puts hot steam into milk, making it possible to make lattes.

Let’s take making a cappuccino with the Jura, for example. Instead of having to froth your milk manually, the Jura will froth the milk for you and layer it into your cappuccino perfectly. Forget having to clean a separate canister and frother; it’s all done for you right within the machine. The Jura can even tackle more complicated drinks such as a latte macchiato. The Jura will lay down a layer of foam on the bottom of your cup, add coffee, and finish it off with a perfect layer of foam on top creating a truly authentic latte macchiato.

After extensive researching of current high(er) end coffee machines, I purchased the Jura C65 to replace my Jura F7 - which had finally failed after 11 years of reliable service. Set-up was fast and easy -- instruction booklet is well organized with useful diagrams. Am completing the 1st week of daily use: so far so good. The C65 produces excellent coffee. Controls are less complicated than my old F7, and it is easy to adjust to fit individual tastes -- strength, cup size, temperature, etc. Only fret is reliability -- will it match the duration of the F7?


When prompted by the machine that it’s time to clean, find the “clean” option under the various cleaning programs and be prepared to follow the instructions it gives you. This is usually as quick as emptying the grounds tray and pressing the rotary dial one more time. Please a cup or jug under the spout to capture the cleaning waste that will be dispelled from the machine. You will hear the machine perform an initial rinse, and then prompt you to add the cleaning tablet which will be inserted into the pre-ground coffee compartment. After another push of the rotary button, the machine will go through an approximately 20 minute cycle so you’ll want to do it when you have a bit of time.

As previously mentioned, this grinder is a bit less sturdy than its new revision, the 565. The 560 has the same issues with its mechanical timer, with the grind mechanism starting before you have had a chance to set the time. This results in a somewhat inconsistent grind quantity. The hopper lid is also not completely airtight, so it isn’t recommended that you keep your beans in it for more than a few days. The same issue with static buildup is also present, and may lead to a messy countertop.
The Impressa Z6 employs Jura’s innovative Pulse Extraction Process brewing system. As opposed to a constant flow, water is instead pulsed through the grounds in short intervals that extract greater intensity and aroma while shortening the overall brew time. With P.E.P., espresso and ristretto can be prepared with greater clarity and flavor than ever before.
3) This machine is crazy smart. It knows exactly when to clean itself, or tells you when to start the cleaning cycle. To clean it, all you do is insert a tablet in the coffee powder drawer and it does its thing. It knows when it needs water, when the filter needs to be changed, etc. In fact, since we have a water filter built into our refrigerator, we just use that filtered water in the coffee machine and therefore we don't need to use the expensive water filters. Bottom line, if you just pay attention and clean the machine on a regular basis when it tells you to, this is a no-brainer machine.
×