The Aroma G3 grinder uses conical steel burrs and six degrees of fineness to grind quickly, thanks to the perfected cutting angles that produce 60% less residual grounds. The result is a quieter grinder that preserves more of the flavor and aroma of the freshly ground beans while operating twice as fast. An integrated bypass doser allows for pre-ground coffee brewing.

Six years and 7540 shots of espresso. The only downside of this machine is that it is too easy to use so that you end up drinking more cups than you might otherwise. It's very fast to heat up, both for the main heating block, as well as for steam. The steamer wand takes some practice to get good, tight foam, but once you figure out the technique it's not difficult. The openings in the wand can clog up if you don't wipe it down right after use. I also give a short blast of steam right after that as well. After about five years we bundled it up and sent it in to the factory for cleaning and reconditioning. It came back as good as new and it's still going strong. About the only real negative aspect to the machine is that it tends to be a bit noisy, but probably no more so than someone using a fully manual pull machine and grinder.


It uses a stainless steel conical burr grinder to get your beans just right, and it has a high-pressure system to extract more flavor in less time. The foam frother is remarkable as it produces fine foam that will make your coffee look and taste so much better. You can clean the system out relatively easily, and it allows you to control the strength of your beverages. Finally, it has an energy saver mode, and it’s slimmer than other two-cup models.

As previously mentioned, this grinder is a bit less sturdy than its new revision, the 565. The 560 has the same issues with its mechanical timer, with the grind mechanism starting before you have had a chance to set the time. This results in a somewhat inconsistent grind quantity. The hopper lid is also not completely airtight, so it isn’t recommended that you keep your beans in it for more than a few days. The same issue with static buildup is also present, and may lead to a messy countertop.
Starting with the brew unit, the first thing to understand is that it’s not removable.  From a practical perspective, what that means for you is that about once a week, you’ll need to pop a cleansing tab into the bypass doser to clean the unit.  No big deal, but our personal preference is for removable units you can rinse by hand to ensure a thorough cleaning.
Flipping open the tank lid reveals a plastic wand that houses a charcoal water filter pod (one is provided in the box). The filter setup sits within a special receptacle on the tank's interior left side. According to Capresso, the gadget will remove up to 82 percent of "the chlorine and other impurities found in tap water, and will do so for about six weeks, assuming you make one pot (10 cups) daily. It's a nice option to have, especially if you live in an area with substandard water, although remembering to swap in a new filter can be a drag.
Aside from the display, another feature of the Jura Impressa F8 that is worth mentioning is the Expert Mode. As the name suggests, this feature is ideal for coffee connoisseurs as it allows changing or adjusting the settings for all drinks programmed on the machine. It also gives users the option of adjusting the volume of the shot once it starts to brew.
The Delightful: The Z7 One-Touch is the perfect coffee brew center for discerning coffee lovers (if you are reading this, you are one) who need an early morning caffeine fix in minutes. Just as its name implies, a simple push of a button delivers rich, cafe-quality coffee, which is ideal for those who are not up to complex programming or measuring the influence of dreaded A.M brain fog.

Jura offers the ultimate in luxury coffee machines. Designed for those with discerning tastes, this well-known brand offers some of the best coffee makers you can buy – period. From single-serve machines to top-of-the-line super automatic espresso makers, Jura does it all. For the home-brewing enthusiasts, the following three models are the best-of-the-best.


That’s a pity because as auto-frothers go, it’s a very good one.  The one thing we’re not so crazy about is the fact that you’ve got to run plastic tubing from your milk source (you have to provide your own, by the way – you do not get one when you purchase the machine) to the frothing arm, which makes your very expensive coffee machine look like a high school science project.
To enable the filter and coffee machine to communicate, JURA uses modern RFID technology. Any machine fitted with the intelligent water system (I.W.S.®) recognises when a filter is inserted, automatically switches to filter mode and starts the rinsing process. When the filter capacity is nearly used up the machine prompts the user to change the filter. If the filter is not changed, the machine activates descaling mode. After a certain amount of use, the user is prompted to descale the machine. This can only be done when the filter is removed, so there is no more risk of user error resulting from misunderstandings.
Even better, you won’t have to worry about stale water ever again and that’s because the ThermoBlock technology is going to channel the right amount of water required by the specific drink you’re preparing. On top of that, you also don’t need to worry about experiencing any metallic taste in your coffee and that’s thanks to the machine’s stainless steel lining.

To really own your drinks, Jura designed the Impressa Z6 super-automatic espresso machine to include three brew temperature and three hot water temperature settings, ten coffee strength settings and ten milk temperature settings. It’s rare that we see so much flexibility for coffee strength, and rarer still to see a wide range of milk temperatures. In truth, many machines don’t feature milk temperature settings at all, so we were excited to brew with the Z6, and it didn’t disappoint. The Impressa Z6 quickly ramps up from brew to steam temperature in a short six seconds, so it’s great for people like us, who need caffeine (and need it now!). For a more full-bodied espresso and decidedly thicker crema, the Impressa Z6 uses Jura’s proprietary Pulse Extraction Process, to fire short pulses of water through the grounds during brewing, in order to get the most out of the extraction. Jura’s innovative TFT display shows, in living color, your personal list of favorite drinks right on the main screen and ready to brew at the push of a button. A longer list of up to 21 customizable specialty drinks is browsable via the rotary switch, so you won’t step on anybody’s toes at the office programming a drink to your particular specifications.
Everything about the Gira 5 is perfectly designed and engineered to produce incredible coffee drinks at twice the pace of other units. If we had a need for this much coffee this is the model we would buy, but our current consumption simply doesn’t warrant it. The Giga 5 is very popular in office settings but we also know families who entertain that have it in their home.
Turn, press, enjoy - that's how easy it is to enter the world of impressa; with the one-switch operating concept of the rotary switch and the 11-language plain text display, it's easy to create the perfect Coffee every time. Thanks to the high-performance conical grinder, the beans are always freshly ground. The simple, compact design with its elegant Platinum finish gives the impressa C65 an imposing yet understated look in any surroundings.
From the outside, the Giga 5 looks attractive. It has a color TFT (thin film transistor) LCD screen display on the top front and center, with a stylish aluminum chassis with black plastic sides. This unit will definitely enhance the look of any kitchen. There’s a dedicated hot water spout at the front of the machine plus a couple of adjustable spouts for making coffee. Located on top of the unit you will find on/off buttons, a program button, and a rotary switch that is key to navigating the Giga’s menu.
×