Starting with the brew unit, the first thing to understand is that it’s not removable. From a practical perspective, what that means for you is that about once a week, you’ll need to pop a cleansing tab into the bypass doser to clean the unit. No big deal, but our personal preference is for removable units you can rinse by hand to ensure a thorough cleaning.
As previously mentioned, this grinder is a bit less sturdy than its new revision, the 565. The 560 has the same issues with its mechanical timer, with the grind mechanism starting before you have had a chance to set the time. This results in a somewhat inconsistent grind quantity. The hopper lid is also not completely airtight, so it isn’t recommended that you keep your beans in it for more than a few days. The same issue with static buildup is also present, and may lead to a messy countertop.
With most super automatic machines, when preparing your favorite drink there is undoubtedly going to be a loss of quality in the process, but that is not the case with the PrimaDonna S Deluxe from DeLonghi. The ECAM26455M uses an integrated frothing system and the milk container in order to immediately deliver to your cup both the right amount of frothed or steamed milk and freshly brewed espresso.
The first thing you’ll probably notice when making your coffee is just how quiet the Giga 5 is. This is thanks to the two ceramic disk grinders that occupy each side of the unit and operate just above a whisper. These discs will probably never wear our and the grind on them is extremely precise and always consistent. It offers 18 completely customizable specialty drinks through the intuitive and easy to navigate display which provide enough variety to satisfy everyone’s tastes.
Mixed Reviews. Searching various sources, Jura ENA 5 Reviews seem to have either “love it” or “hate it” reviews and very few in between. This can indicate that the machine is a good design that works well at first, but may not in the long run, and the company is not always stellar at getting machines fixed. Common themes among negative reviews include broken parts and the machines simply stopped functioning.
Together, they help coffee enthusiasts prepare the perfect espresso every single time. Use the center spouts to select from hot water for tea, a shot of espresso, or a cup of coffee or opt for milk for hot chocolate, cappuccinos or lattes. The interface of the XS90 is very user friendly and given the fact it features automatic cleaning capabilities, you don’t need to worry about cleaning it yourself.
2) Overall, I have to say I absolutely LOVE this machine. Here's how I rationalized payment for such an expensive indulgence: if you figure a Starbucks costs approx. $3, and you buy one everyday (which I was), it would take 600 cups to break even. Well, with the automatic counter on my machine, I have made more than 1600 cups! This machine paid for itself in the first year..easily. ok, so now that you're past the issue of paying so much for a coffee machine, here's more...
The buttons of the Jura XS90 can be easily programmed for setting volume, strength and temperature of the espresso dispensed. If you take a closer look at the right side of the XS90, you’ll notice that the multi function button is perfect for programming the lattes or cappuccino, including the strength and amount of milk, but also the temperature of espresso dispensed. If you want, then you can even adjust the milk’s foaminess.
While it might seem odd to mention, some people do like to use pre ground coffee with a bean to cup machine, at least occasionally. A common reason is to get a cup of decaffeinated coffee from time to time, without needing to empty out the beans from the hopper, make a drink then switch it all back again. Similarly, if you have a brand of pre-ground coffee that you like as a change from your normal freshly ground beans every so often, the Impressa F8 has you covered.
There is a learning curve and one has to get the coffee to water ratio correct for one's preferences...changing it for other drinkers. But it is truly automatic, which is nice for serving more than one person quickly, brews quickly and makes very good coffee. Jura took this machine and rewired it per the wiring recall on this model, returned it, all at no cost to me.
The Jura A9 truly shines in the milk drinks department. It features 2 height adjustable spouts that go anywhere from two point two and up to five point four inches if you plan on using taller However, when it comes to the milk, the machine uses a pick-up tube system. What this means is that now you can just place the tube into the milk container and prepare delicious milk based drinks. For better results though, it’s best that you either get Jura’s cool control milk cooler or their optional thermal milk container. That’s because not only is it better to keep milk chilled for sanitary reasons, but chilled milk also produces better froth.
The first notable downside to this economy grinder is the build quality. Although it is standard for high-end burr grinders to use stainless steel enclosures, the Capresso 559 is built from a cheaper plastic. Beyond its suspect longevity, the cheaper build also causes problems in functionality. For example, beans can jam the grinder chute, causing the machine to stop functioning until it is cleaned.
Flipping open the tank lid reveals a plastic wand that houses a charcoal water filter pod (one is provided in the box). The filter setup sits within a special receptacle on the tank's interior left side. According to Capresso, the gadget will remove up to 82 percent of "the chlorine and other impurities found in tap water, and will do so for about six weeks, assuming you make one pot (10 cups) daily. It's a nice option to have, especially if you live in an area with substandard water, although remembering to swap in a new filter can be a drag.
First, I really wanted to like this machine. The specs, design, functionality, were exactly what I was looking for in a super automatic espresso machine, however the machine failed to perform the basic task of making espresso. I found the display, programming, controls, and size of the water chamber to be good. The milk frothing system was cumbersome as it required you to attach tubes each time you wanted a milk drink. When the system worked, the steamed milk was hot and the consistency was great for cappuccinos and lattes. However, if the tube was not connected precisely (very little room for error) the consistency of the milk was poor. I ended up having to restart the process several times as the tubes were not connected properly or they came loose as the milk was pumped. The tubes also presented an issue with clean up in that they had to be cleaned after each use.
The other point that we wanted to highlight isn’t necessarily a negative per se, but just the fact that it’s a lot to spend, and let’s face it – it is! There’s a lot of machines available in the sub £500 range, and we’d never advocate or encourage spending more than you can afford. Having said that, you do get what you pay for, and in this case we believe it’s exceptional quality. If you really love coffee, it’s probably worth paying as much as you’re comfortable with to get a great machine, and that’s exactly what you’re getting here.
When the milk is finally steamed on the dual element system, the machine is ready to continue making more espresso shots. Keep in mind that if you choose to get a single element machine, you’ll need to wait five minutes so that the boiler can cool off naturally and then run hot water through the steam wand for ten seconds in order to purge the boiler of steam.
What a great price on this refurbished Jura Capresso Impressa F9. Our previous Jura Capresso lasted 10 years and made thousands of cups (sorry no counter on that model). I knew a refurbished model from this same maker would be a good bet. And sure enough it has proven to be just that. We have had it a month and have already made well over 250 cups with not one complaint. THANK YOU for making this product more affordable to the public with the refurbished price. During the economic recession we have been cutting cost when ever possible and I truly appreciate that this product was made available at such an exceptional price.
Hate getting up in the morning? That’ll change with the Z6. Just the thought of gazing at this handsome clean, shiny chrome machine was enough to have us leaping out of bed at 6am. Brewing coffee is fairly simple and yields powerful, yet tasty cups. Espresso based drinks are a cinch to produce too—but often taste slightly watered down. The best part is though is the nearly silent grinder, which is quiet enough to run on full power without fear of waking the whole house up. —Neil Gellar
To really own your drinks, Jura designed the Impressa Z6 super-automatic espresso machine to include three brew temperature and three hot water temperature settings, ten coffee strength settings and ten milk temperature settings. It’s rare that we see so much flexibility for coffee strength, and rarer still to see a wide range of milk temperatures. In truth, many machines don’t feature milk temperature settings at all, so we were excited to brew with the Z6, and it didn’t disappoint. The Impressa Z6 quickly ramps up from brew to steam temperature in a short six seconds, so it’s great for people like us, who need caffeine (and need it now!). For a more full-bodied espresso and decidedly thicker crema, the Impressa Z6 uses Jura’s proprietary Pulse Extraction Process, to fire short pulses of water through the grounds during brewing, in order to get the most out of the extraction. Jura’s innovative TFT display shows, in living color, your personal list of favorite drinks right on the main screen and ready to brew at the push of a button. A longer list of up to 21 customizable specialty drinks is browsable via the rotary switch, so you won’t step on anybody’s toes at the office programming a drink to your particular specifications.
Have used a SAECO machine for the last ten years.Finally "blew up" and I needed a replacement. Have known the Jura machines for a long time but because of the price never considered purchasing one. Finally had the courage to purchase the Jura J9 and have absolutely no regrets. Makes excellent Espresso or a coffee with a crema. Cappuccinos or Latte Macchiatos are a breeze to make. Wish I would have purchased earlier.
This is probably one of the more important points to note – just how easy it is to get started. Bean to cup coffee machines tend to fall into two categories, they are either easy to use but inflexible, or take time to master and give a lot of opportunity to experiment. This Jura machine gives a lot of scope to both, which is great if you’re short on practice time or not sure if you’ve got the skills needed just yet.
The IPBAS system is a special 2 step pre infusion cycle that conditions and also moistens the ground coffee to get the best flavor extraction with excellent crema topping. Thanks to the great functionality of the F50, you can brew from 1 to 16 oz cups of coffee in 5 different strength settings. It can also grind from five to max sixteen g of coffee, ranging in strength from extra mild to extra strong.
When looking for a fully automatic espresso machine, you have the choice to go for either a dual heating system or a single heating system machine. For instance, if you go for a dual boiler machine, then when you’re going to start the steam model, you’ll need to wait for about ten seconds until steam is available. With a single element system, the wait time increases by a factor of 5 and it takes about fifty seconds to get steam.
This is a high-end coffee machine that has a price tag of around $5,000. You can choose from over 20 various types of coffee drinks with this professional unit, which can serve you faster than a Starbucks barista. It can do almost everything you can expect from a sophisticated coffee machine. If you consider yourself a coffee connoisseur, you owe it to yourself to upgrade to the Jura Giga 5 Coffee Maker.
The ENA Micro 1 is the simplest of all of Jura’s machines. It is the smallest machine on the list, the most affordable, and packed with the base technologies in Jura’s machines. Your beverage begins by grinding whole coffee beans in a multi-level grinder, which are then pushed through a micro brewing unit. The machine delivers a rich espresso, with a soft layer of crema on top.
The machine is very nice looking in person, very sleek. The instruction manual is pretty sparse on details. It has enough, but it's a little intimidating for a first time user. I took my time and found out that the programming is very user friendly and easy to use. I have ours on our counter with a cabinet overhead. When I fill water reservoir I do pull the machine a bit forward because the reservoir is deep and you have to lift it straight up. It's easy to do but you need a bit of clearance. The bean hopper is in the back, so I pull the machine forward a bit to fill that, as well. Very easy to do. One thing I wanted in the J9 was the option to use a water filter. I have hard water from our tap, and had been filling our DeLonghi from our filtered refrigerator dispenser, but that was cumbersome. With the Jura filter I can fill the deep reservoir right in the little bar sink I have next to the machine. I tested the water before and after, and the Jura filter definitely works to reduce hardness, which is important in keeping the machine free from mineral scale buildup. I think it will be well worth the expense of replacing the filters. It came with one filter and a couple of descaling tabs, which I have not had to use yet.
What sets the Jura line of coffee machines apart for other similar coffee systems is that it does literally everything you need to do with the touch of a button. When preparing the machine, you simply load it with coffee and water, and if it’s your preference, milk or cream. We were originally concerned about cleaning dairy products out of the Jura as this can be a pain point with other systems. You don’t want dairy leftover in any part of the machine as it turns quickly and can easily ruin upcoming batches of coffee. But with the Jura, you load the milk into an easy to remove and clean stainless steel canister making the clean up super simple.
Jura machines all have self-cleaning technologies that prevent scaling, powder buildup, and other problems typical of the industry. That being said, you will need to become familiar with and regularly purchase self-cleaning fluids and tablets that the machine uses to maintain itself. These products are typically included on the page where you buy, but in the event that they are not, we have you covered in our reviews.