Now we’ve looked at what the machine can do, let’s turn our attention to what really matters, what real life customers think. We’ve had a good look around at reviews on the web, and collated the common themes. Hopefully this will give you a real feel for what is good and not so good about this machine, with some battle testing thrown into our Jura Impressa F8 review!
The first machine I received never worked correctly. The milk would not steam and the espresso would start to come out and then stop. Upon stopping a message would display on the screen asking to press a button to fill the pump. This would occur 2-3 times before an expresso could actually be made. I experimented with several different grind settings, coffee strength, water temperatures, etc, but with no success. The machine continued to pump a few drops of espresso, asking to refill the pump, and waste the previous grinds. I literally wasted 2-3 cans of Illy espresso without ever getting espresso. In addition, with each espresso cycle, a large amount of water would precede any espresso. For example on a 1oz shot, about 0.1oz would be water that didn't run through the coffee.
It would be a mistake to say that there’s no learning curve at all on the E8. It has one; it’s just not particularly steep. Sure, there are a lot of settings, and a lot of things you can change, tweak and adjust, but honestly, the hardest part of its operation is going to be changing your preferred drink settings and familiarizing yourself with the way the menus work.
To enable the filter and coffee machine to communicate, JURA uses modern RFID technology. Any machine fitted with the intelligent water system (I.W.S.®) recognises when a filter is inserted, automatically switches to filter mode and starts the rinsing process. When the filter capacity is nearly used up the machine prompts the user to change the filter. If the filter is not changed, the machine activates descaling mode. After a certain amount of use, the user is prompted to descale the machine. This can only be done when the filter is removed, so there is no more risk of user error resulting from misunderstandings.
The new Gaggia Brera is a very impressive super automatic espresso machine that has a small form factor, making it perfect for use on small kitchen countertops. Not only that, but it seems that the company has focused, among other things, to ensure that the Brera fully maximizes user convenience. For instance, the water tank, drop tray and the dregs drawer are all within reach and can be easily accessed from the machine for simple, swift maintenance and regular cleaning. With this model, beverage selection and machine programming has been greatly simplified, allowing users to easily navigate through the options which are certainly more than you’d expect from such a small machine.
Maintenance and Cleaning: If you use steamed milk, I highly suggest changing the setting to display the "Rinse Milk System" prompt to appear right after using. The default is 10 minutes, and you cannot select this rinse from the Maintenance menu. The quicker you rinse out the milk residue, the less likely you are to get clogs. The manual also suggests to use the Jura Cappuccino Cleaner daily. I tend to rinse often and do a breakdown cleaning of the milk system and frother about every other day.
The Jura A9 truly shines in the milk drinks department. It features 2 height adjustable spouts that go anywhere from two point two and up to five point four inches if you plan on using taller However, when it comes to the milk, the machine uses a pick-up tube system. What this means is that now you can just place the tube into the milk container and prepare delicious milk based drinks. For better results though, it’s best that you either get Jura’s cool control milk cooler or their optional thermal milk container. That’s because not only is it better to keep milk chilled for sanitary reasons, but chilled milk also produces better froth.