There are other factors to consider, such as color and material, but most Jura machines come with customizable aesthetics. We will cover more in-depth things to know in the next couple of sections, but for now, hold on to this list of general thoughts as we begin to browse the different Jura lines and examine what each different type of machine has to offer.
The Micro 1 in many ways is the Micro 9’s little brother. This simple, ultra compact Jura machine features a sleek black design that is both minimal and modern. With the Micro 1, Jura set out to make their smallest unit without sacrificing the power and quality they are known for. And after out tests with a demo unit, we can safely say that they succeeded.
Edit - 01/15/2015: Eight and a half years later, this gem is still cranking out great coffee. I had it serviced by the wonderful folks at CoffeeBoss in Cornelius, NC last year, and it's still going strong with a cup count of 9,922. The brew group is not user serviceable, so occasional maintenance should be expected. I use distilled water (at the cost of flavor, I know) now that I'm back in the city on municipal water, so I don't need or use the Clearyl filter (I recommend it for tap/well water, though), and I do use a cleaning tablet within 5-10 cups of when it starts asking for it on the LED display.
When you think of other “one-touch” coffee solutions on the market, what typically comes to mind are single serve coffee machines that utilize K-cups or some other kind of coffee pod. While these definitely changed the game when first introduced, they leave a lot to be desired in terms of waste and the Jura has evolved past them. K-cups and coffee pods produce an extreme amount of plastic, cardboard and foil that is filling up landfills as at a rapid pace. Not to mention, by the time the coffee gets to your machine, the grounds have been sitting on the shelf for months and are most likely very stale.
Along with premium engineering, Capresso products are designed with high-end aesthetics in mind. Clean black trims, aesthetic curves, and clean stainless steel finishes are all common branding traits. Capresso products are also notably ergonomic, featuring comfortable handles, easily visible and extruded controls, and a notable lack of rough edges. With design awards to back it up, Capresso produces beautiful, innovative, and powerful coffee equipment.
I was somewhat apprehensive about purchasing this, but 2 weeks in very satisfied with our purchase. The coffee and espresso quality is excellent. Pleasantly surprised with the milk steamer, the lattes I’ve made are as good as any big coffee shop. It’s also easy to maintain and clean, takes about 2 minutes everyday. I can’t imagine a machine being easier to use.
Turn, press, enjoy - that's how easy it is to enter the world of impressa; with the one-switch operating concept of the rotary switch and the 11-language plain text display, it's easy to create the perfect Coffee every time. Thanks to the high-performance conical grinder, the beans are always freshly ground. The simple, compact design with its elegant Platinum finish gives the impressa C65 an imposing yet understated look in any surroundings.
You get a full roster of customer support with the Capresso EC-100. If you run into problems, you can contact customer service using a toll-free phone line during business hours or by email. You can also check the Capresso Facebook page to learn more about your espresso maker. You get a one-year warranty with this espresso machine, which is typical for the espresso maker industry.
Jura is a premium brand that specialises in automatic coffee machines. With the majority of their models costing over £1000 - and some as much as £3700 - their target market is coffee enthusiasts who are willing to pay more for the best coffee. On this page, we'll go through some of the best Jura bean-to-cup coffee machines, along with reviews of why we think they are excellent models.
Six years and 7540 shots of espresso. The only downside of this machine is that it is too easy to use so that you end up drinking more cups than you might otherwise. It's very fast to heat up, both for the main heating block, as well as for steam. The steamer wand takes some practice to get good, tight foam, but once you figure out the technique it's not difficult. The openings in the wand can clog up if you don't wipe it down right after use. I also give a short blast of steam right after that as well. After about five years we bundled it up and sent it in to the factory for cleaning and reconditioning. It came back as good as new and it's still going strong. About the only real negative aspect to the machine is that it tends to be a bit noisy, but probably no more so than someone using a fully manual pull machine and grinder.
If you are going to try to make other coffees with this machine, plan on doing some trial runs to get it right. Since you can adjust the amount of water and beans, you can make standard coffee if you want, but it’s not going to be as good as the espresso. Overall, we only recommend this to espresso drinkers, but it’s nice to know that you can make other beverages if and when you want a change.
Even better, you won’t have to worry about stale water ever again and that’s because the ThermoBlock technology is going to channel the right amount of water required by the specific drink you’re preparing. On top of that, you also don’t need to worry about experiencing any metallic taste in your coffee and that’s thanks to the machine’s stainless steel lining.
Mixed Reviews. Searching various sources, Jura ENA 5 Reviews seem to have either “love it” or “hate it” reviews and very few in between. This can indicate that the machine is a good design that works well at first, but may not in the long run, and the company is not always stellar at getting machines fixed. Common themes among negative reviews include broken parts and the machines simply stopped functioning.
The ultra-modern frother technology prepares milk foam of unprecedented quality. The foam is both fine and compact, giving it a creamy consistency with a subtle sweetness. The frothers have two separate chambers in which the milk is frothed twice. Any bubbles that form will burst, compacting the foam and making it extremely fine. Three bars in the frother spout slow down the foam as it exits the frother, so it is poured slowly and evenly into the cup.
Best of all, thanks to a thermal coffee pot, if you don't polish off the whole pot right away, it will still stay piping hot hours after it was brewed. For $130, the MT600 from Capresso offers all these abilities plus is wrapped up into a snazzy brushed-metal-and-black-plastic frame. Sure, the MT600 won't deliver a truly sublime cup of drip-brewed coffee. For that there's no getting around splurging at least $200 and up for a more capable machine.
If you’re not familiar with the term, TFT is a more high-tech version of a standard LCD. The colors are brighter, and the image is sharper, thus enabling you to see what you’re doing much more easily. The screen itself is 2.8 inches, and it uses a rotary dial to select the kind of coffee you like. What’s noticeable about the F8 is that it’s a full-service coffee maker, but it’s smaller than other models that Jura offers.
Like other Jura machines, the spouts can be adjusted 2.6-4.4” to accommodate any size cup or beverage. We found the adjustable spout really handy in preventing and splashing or spillover onto the machine which limits clean up and also help create the perfect crema. We found the foam that the C65 produced to be incredibly light with almost a light, feather consistency. While the cost of this unit is slightly higher, our calculations had it paying for itself after only a few months. When we tracked the amount of coffee used and compared it to how much it would have been if purchased from a coffee shop, the Jura paid for itself quicker than you might expect. Not to mention these machines are incredibly well built and will last for years before ever needing to be repaired or serviced. And when that time does come, Jura has always been responsive and communicative which makes sending the unit in painless.
Most modern coffee machines will feature a foam frother and this is also a vital part of a coffee machine like the Jura C65. The majority of users actually require this feature in order to make tasty lattes and cappuccinos. The good news is that the Jura C65 does indeed feature a revolutionary fine foam technology that ensures the milk has lots of foam. On top of that, the coffee spout’s height is adjustable, so you can easily fit a wide range of cups ranging from sixty five millimeters and up to one hundred and eleven millimeters.