While all of the brand’s machines take up substantial counter space, you can get all of the advanced features without taking over your kitchen. The Impressa F8 is designed as a two-cup coffee maker - it has dual nozzles in the front so that you can make them side by side. However, you can also use the spouts for perfectly frothed milk instead. So, if you’re looking for a high-quality cappuccino, you will get it without having to do anything extra.
First, I really wanted to like this machine. The specs, design, functionality, were exactly what I was looking for in a super automatic espresso machine, however the machine failed to perform the basic task of making espresso. I found the display, programming, controls, and size of the water chamber to be good. The milk frothing system was cumbersome as it required you to attach tubes each time you wanted a milk drink. When the system worked, the steamed milk was hot and the consistency was great for cappuccinos and lattes. However, if the tube was not connected precisely (very little room for error) the consistency of the milk was poor. I ended up having to restart the process several times as the tubes were not connected properly or they came loose as the milk was pumped. The tubes also presented an issue with clean up in that they had to be cleaned after each use.
Yep, the Barista Express isn’t just an elegant, well-built espresso machine – it also features a built-in grinder, allowing you to make coffee with beans you’ve smashed into dust literally seconds earlier. Freshness means a lot in the coffee world, so this is a Big Deal – as is the low-pressure pre-infusion of the grounds before the water is forced through them at higher 50 bar pressure.
Some machines can be quite slow to work their way through programmes, but Jura have put a lot of thought into minimising these delays. The water heating tends to be the cause of the waits, so the F8’s solution is to heat it as it passes through the internal pipes of the machine. The technical detail is a bit beyond us, but it seems to work well. If you want to know more and like the geeky detail, give ‘Jura Thermoblock’ a Google!
Jura does not make any budget-friendly machines, so you should come in expecting to make an investment. Prices range from $800 for a single cup machine, to above $5,000 for Jura’s top of the line model. You can always search for refurbished models, and Jura occasionally offers factory serviced machines that function like new, but have been returned to the company for unspecified reasons.
From the outside, the Giga 5 looks attractive. It has a color TFT (thin film transistor) LCD screen display on the top front and center, with a stylish aluminum chassis with black plastic sides. This unit will definitely enhance the look of any kitchen. There’s a dedicated hot water spout at the front of the machine plus a couple of adjustable spouts for making coffee. Located on top of the unit you will find on/off buttons, a program button, and a rotary switch that is key to navigating the Giga’s menu.

The Jura A9 truly shines in the milk drinks department. It features 2 height adjustable spouts that go anywhere from two point two and up to five point four inches if you plan on using taller However, when it comes to the milk, the machine uses a pick-up tube system. What this means is that now you can just place the tube into the milk container and prepare delicious milk based drinks. For better results though, it’s best that you either get Jura’s cool control milk cooler or their optional thermal milk container. That’s because not only is it better to keep milk chilled for sanitary reasons, but chilled milk also produces better froth.
×