That’s a pity because as auto-frothers go, it’s a very good one.  The one thing we’re not so crazy about is the fact that you’ve got to run plastic tubing from your milk source (you have to provide your own, by the way – you do not get one when you purchase the machine) to the frothing arm, which makes your very expensive coffee machine look like a high school science project.
First of all, the TFT display will notify you when you are running low on anything (which the F8 lacks), and it will tell you when it needs cleaning. Having this kind of automatic reminders ensures that you can extend the lifespan of your machine. The other thing that we like about the E6 better than the F8 is the grinder. The G3 grinder system is a significant improvement.
The machine is very nice looking in person, very sleek. The instruction manual is pretty sparse on details. It has enough, but it's a little intimidating for a first time user. I took my time and found out that the programming is very user friendly and easy to use. I have ours on our counter with a cabinet overhead. When I fill water reservoir I do pull the machine a bit forward because the reservoir is deep and you have to lift it straight up. It's easy to do but you need a bit of clearance. The bean hopper is in the back, so I pull the machine forward a bit to fill that, as well. Very easy to do. One thing I wanted in the J9 was the option to use a water filter. I have hard water from our tap, and had been filling our DeLonghi from our filtered refrigerator dispenser, but that was cumbersome. With the Jura filter I can fill the deep reservoir right in the little bar sink I have next to the machine. I tested the water before and after, and the Jura filter definitely works to reduce hardness, which is important in keeping the machine free from mineral scale buildup. I think it will be well worth the expense of replacing the filters. It came with one filter and a couple of descaling tabs, which I have not had to use yet.
4) The coffee and espresso are great. I've learned to make a latte just like Starbuck's and I haven't been back since. Some people complain that the frother doesn't work well, but here's the trick: first, you should use non-fat or low-fat milk. For some reason, lower fat milk froths better every time; second, be sure to clean the frothing nozzle after each use. Kind of a no-brainer, I know. Third, there are two settings on the frother, and you can change the setting by sliding the sleeve on the frothing tip up or down. Experiment with this and you will get the perfect froth, really.

One of the things that makes Jura such a world-renown coffee company is that their machines are so easy to use. As long as you have beans, water, and milk in the container, all you have to do is push a button and wait for the perfect cup to arrive. In this case, the Impressa F8 is one of the more technologically proficient models, thanks to its TFT screen.
Keep the machine clean. The F7 does a self-cleaning of the milk and coffee system every time you brew. But remember to stay on top of regular maintenance for the best quality. The machine makes that easy by telling you how and when to do the maintenance. It’s not hard, just drop a tablet of cleaner (from Amazon) in the water tank and you’re ready to go in 15 minutes.
It might seem like a trivial point, but not all machines have thought about this. The Jura’s power cable emerges at the bottom of the rear of the machine, making it very easy to plug it in and neatly arrange any excess cable out of sight. There’s also a ‘master’ power switch in the same location – worth noting as we discovered, having thought the machine was dead on arrival after pressing the power button on top and nothing happening!

The IMPRESSA J9 is probably the most popular model after the newer Micro 9 due to its breadth of features and overall precision when brewing and crafting a litany of specialty coffee drinks. The concept behind the J9 could not be simpler: simply use the rotary dial to select your desired drink, press the button, and sit back and enjoy. This model is absolutely beautiful and looks like it was pulled right out of an Italian café. The matte sheen and silver hard plastic give the J9 and functional sophistication that will definitely impress you.
Strength and temperature selection for a precise cup – The unit has four selections for the strength of coffee you want and lets you control the brew temperature for different drinks. This is a great way to customize a cup of coffee for guests and family. Instead of a pot evaporating away on the heater all day, just dial in the strength desired and 60 seconds later, you have your perfect cup of coffee.
Just by the water canister (which holds just under two litres), there’s a replaceable water filter that cleans the water as the machine begins each cycle. Depending where you live, this may carry a different weight of importance, but if you’re in an area where water has a strong taste, this may well be a big plus towards buying the Jura Impressa F8 over other machines. Water is such a big part of making coffee, it will go a long way towards giving consistent results day after day!
I also hate my Jura-Capresso coffee machines. Not only do they cost a wad of money, the insides cannot be end-user cleaned or serviced. The O rings in the brew mechanism go out after a few years and bring everything to a noisy grinding halt. Plus, the machine makes almost-hot enough coffee... 15 seconds in the microwave and it's hot, but sometimes makes the coffee bitter. I deduct one star for these gripes and now we're at three stars.
Don’t you wish there was an easier way to have café-quality coffee without leaving your house? You know the coffee that makes you smile after every sip. Wouldn’t it be great to have a mini café shop, with you being the number one customer, in your kitchen? The Jura Capresso Impressa coffee machine brings delightful made-to-order coffee prepared for perfection without spending $5 every time. Check out the Jura Capresso Impressa S8.
Also, we went through a brief episode in which it would refuse to brew anything (as if it didn't have the power to punch the water through the puck of coffee). I remedied this with a descaling cycle as well as wiping out the parts above the removable tray thoroughly. (I use filtered water in the machine, but the descaling seems to be a more serious cleaning than the normal automatic cleaning.)
With a built-in coffee grinder, the Ena Micro 1 will grind your beans just before brewing, and store your beans in an airtight, aroma-preserving chamber on top of the machine. The variable brewing chamber allows for you to choose the individual preparation and strength of two cups at one time. And the included filter ensures your water is as pure as possible for the best-tasting espresso around.
So far, we’ve been looking at Jura Coffee Makers that can do either one or two cups at once. However, if you don’t plan on sharing, then you probably want a single-serving model instead. The ENA 9 One Touch is one option that can both save money and counter space in your kitchen. Compared to other Jura units, this one has a lot of the same standard features.
And that’s it. There’s very little in the way of cleaning or maintenance to be done, bar an occasional emptying of the drip tray, an occasional rinsing of the removable pod holder and, of course, the refilling of the water tank. The tank isn’t huge (0.8l), so you’ll need to do the latter fairly frequently. The drip tray, for its part, is adjustable – you can place it at one of three heights to suit the size of drinking vessel and reduce the chance of spillage.
Whatever you’re into, the Impressa F8 has a coffee for you. While it’s great for the common choices like espresso and americano, it’s just as capable of serving up a macchiato too, or pretty much anything else you can think of. Of course, the more skilled you are as a barista, the more experimental you’ll be able to be, but if you just want something easy, stick with the 13 preset programmes and enjoy what Jura’s experts have created for you in advance.
Jura’s Impressa C65 uses a one-switch operating system and simple user interface for fool-proof coffee brewing. Multiple strength settings allow you to customize your coffee drink for the perfect espresso, cappuccino, or macchiato at the push of a button. Its height-adjustable coffee spout adjusts from 2.6 to 4.4 inches to be compatible with coffee mugs of all sizes.
Our final Jura Coffee Maker is technically classified as an espresso maker. As such, it’s only designed for espressos, although you can experiment to make different kinds of beverages if you want. As an espresso machine, this unit is really impressive. If you have used other similar models, you will be impressed by the quality and convenience that the Ena Micro 1 offers.
Yep, the Barista Express isn’t just an elegant, well-built espresso machine – it also features a built-in grinder, allowing you to make coffee with beans you’ve smashed into dust literally seconds earlier. Freshness means a lot in the coffee world, so this is a Big Deal – as is the low-pressure pre-infusion of the grounds before the water is forced through them at higher 50 bar pressure.
Just by the water canister (which holds just under two litres), there’s a replaceable water filter that cleans the water as the machine begins each cycle. Depending where you live, this may carry a different weight of importance, but if you’re in an area where water has a strong taste, this may well be a big plus towards buying the Jura Impressa F8 over other machines. Water is such a big part of making coffee, it will go a long way towards giving consistent results day after day!
×