If the machine you choose doesn’t have a built-in milk frother, Jura’s Automatic Milk Frother If you click this link and make a purchase, we earn a commission at no additional cost to you. will prepare cold, warm, or hot milk foam for use in different espresso-based drinks. Operation of the frother is simple (just one touch), and the machine is designed to pair with any Jura coffee machine.
Some of the more popular mass market coffee machines are starting to look a little bit dated (not least the hugely popular and bestselling ESAM4200 by Delonghi), but that couldn’t be further from the truth with the Jura Impressa F8. It’s a very stylish and sophisticated looking machine, that wouldn’t look out of place in an upmarket cafe or bar. Jura have managed to pack a lot of controls in to the unit to give near unparalleled control over coffee making, yet retain a fairly minimalist look. There’s something about a black and silver finish that just looks the part, particularly on kitchen appliances that sit on the worktop – you don’t want something ugly to look at as a permanent fixture in the kitchen!
Instead of an LCD screen, this model uses a standard LED to show you what kind of coffee you’re making. It’s not quite as involved, but it’s helpful and better than a manual version. With the ENA 9, you can make six different kinds of coffee. It uses two nozzles to layer your beverages perfectly with foam or milk. The frother is a separate unit that connects to the base machine.

Jura were new for our 2017 updates on the site, and we fully expect them to feature highly in our top ten table for 2018, alongside the likes of the Melitta Caffeo Barista TS. With our early reviews, we put the majority of effort into the big names and big sellers, like the Delonghi Magnifica ESAM4200 that’s always near the top of the bestseller list on Amazon. Now that we’ve fairly comprehensively covered those, our attention is shifting towards the premium models that may not sell as many, but will really attract people that know their coffee, and Jura fit that description perfectly.
The Aroma G3 grinder uses conical steel burrs and six degrees of fineness to grind quickly, thanks to the perfected cutting angles that produce 60% less residual grounds. The result is a quieter grinder that preserves more of the flavor and aroma of the freshly ground beans while operating twice as fast. An integrated bypass doser allows for pre-ground coffee brewing.
The ENA Micro 1 is the simplest of all of Jura’s machines. It is the smallest machine on the list, the most affordable, and packed with the base technologies in Jura’s machines. Your beverage begins by grinding whole coffee beans in a multi-level grinder, which are then pushed through a micro brewing unit. The machine delivers a rich espresso, with a soft layer of crema on top.
For most people, a cheap $20 Mr. Coffee or any one of its countless clones is all they require to tackle their day-to-day coffee needs. If you'd like to take a step up from those machines, however, the benefits are huge. First, you don't have to endure fresh-brewed java that tastes bitter, harsh, and grows even more noxious the longer it sits on its electric warming plate. Second you'll be enjoying your first cup in no time, typically less than eight minutes.
09/16/2010 - The C1000 finally gave out after 10+ years and service fees of $250. With all lights now flashing and the loudest grinding noise ever, it was confirmed today with Jura-Capresso Customer Service that this unit is not worth their new $250 service fee to repair (if it could be repaired). I still found the C1000 a great appliance and Jura-Capresso a very reputable company. From a cost-analysis perspective (and these are ONLY estimates), I consume about 700 cups per year which requires about 20 pounds of beans at $10 per pound (Fresh Market) or $200 per year. Ten years worth of coffee beans cost about $2,000. Add the $900 cost of the C1000, plus two $125 service fees, my total investment was around $3,150. I excluded the cost of water since we pay a minimal fee, but never use the charged amount. Equivalent cups of pressure brewed coffee (about $3 per cup from Starbucks) over this ten year period would cost about $21,000. I compare Starbucks prices since there is a huge quality difference between their pressure-brewed coffee and drip coffee at your local food mart. So my break-even point with the Jura-Capresso C1000 was between one and two years. The remaining eight to nine years of coffee I consumed was at no cost (when compared to Starbucks). This analysis only includes the direct financial cost and not the cost of your time/fuel getting to Starbucks. I happily accepted Jura-Capresso’s "one-time replacement offer" to upgrade my C1000 to a new IMPRESSA C5. The list price is $999, but the upgrade cost is only $600. Although my C1000 unit has experienced problems, it continues to be the most awesome coffee machine ever! Once my IMPRESSA C5 machine arrives and has been used a short time, I will post a new product review.Read full review...
You get a full roster of customer support with the Capresso EC-100. If you run into problems, you can contact customer service using a toll-free phone line during business hours or by email. You can also check the Capresso Facebook page to learn more about your espresso maker. You get a one-year warranty with this espresso machine, which is typical for the espresso maker industry.

You’ll find the same basic components in a super automatic espresso machine that you’re going to find in a pump or manual machine: switches, control dials, a steam wand, a boiler and also a water pump. What sets the super automatic apart is the fact that an internal brewing chamber replaces the brew basket and removable portafilter. On top of that, a high quality burr grinder or conical grinder grinds and dispenses the coffee directly into the brewing chamber.


We’re going to start with a rundown of the features of the Impressa F8, so that you know what you’re getting if you choose to buy. A lot of machines offer the same core functions, so we tend to focus on what stands out, so rest assured, if we rate a machine highly (as we do with this one), it’s going to be a good all rounder unless we specifically say otherwise.
We found the Jura J9 to be intuitive to navigate and the state of the art TFT display which features text and images, combined with the rotary selector makes choosing your beverage simple. A standout feature of this model if the “fine foam” technology which utilizes three bars in the frother spout which acts to slow down the foam as it exits the frother so its poured at the right speed and evenly into the cup. The stainless steel vacuum milk container that feeds the frother warms the milk or cream and is easy to clean. The hardened steel grinding heads of the built-in canonical grinder deliver precision ground coffee every single time. There isn’t a single thing the IMPRESSA J9 doesn’t do well and it probably the most well-rounded model on our list.
Jura ENA Micro 90 One Touch Automatic Coffee Center: It might be the world’s smallest automatic machine but it offers big features. The compact machine can prepare a cappuccino and a latte macchiato at the touch of a button and, thanks to fine foam technology, the fine milk foam is always creamy and sweet. The Micro 90 also features a professional grade conical burr grinder, a powerful pump that produces 15 bars of pressure and a one-touch display.
09/16/2010 - The C1000 finally gave out after 10+ years and service fees of $250. With all lights now flashing and the loudest grinding noise ever, it was confirmed today with Jura-Capresso Customer Service that this unit is not worth their new $250 service fee to repair (if it could be repaired). I still found the C1000 a great appliance and Jura-Capresso a very reputable company. From a cost-analysis perspective (and these are ONLY estimates), I consume about 700 cups per year which requires about 20 pounds of beans at $10 per pound (Fresh Market) or $200 per year. Ten years worth of coffee beans cost about $2,000. Add the $900 cost of the C1000, plus two $125 service fees, my total investment was around $3,150. I excluded the cost of water since we pay a minimal fee, but never use the charged amount. Equivalent cups of pressure brewed coffee (about $3 per cup from Starbucks) over this ten year period would cost about $21,000. I compare Starbucks prices since there is a huge quality difference between their pressure-brewed coffee and drip coffee at your local food mart. So my break-even point with the Jura-Capresso C1000 was between one and two years. The remaining eight to nine years of coffee I consumed was at no cost (when compared to Starbucks). This analysis only includes the direct financial cost and not the cost of your time/fuel getting to Starbucks. I happily accepted Jura-Capresso’s "one-time replacement offer" to upgrade my C1000 to a new IMPRESSA C5. The list price is $999, but the upgrade cost is only $600. Although my C1000 unit has experienced problems, it continues to be the most awesome coffee machine ever! Once my IMPRESSA C5 machine arrives and has been used a short time, I will post a new product review.Read full review...

The Saeco PicoBaristo HD8924/47 Super-automatic espresso machine is a superior compact coffee machine from one of the world’s best-known manufacturers. It is an Amazon Choice machine, popular with purchasers and the recipient of excellent reviews. The PicoBaristo provides the widest variety of drinks of any compact super-automatic espresso machine.

We’re going to start with a rundown of the features of the Impressa F8, so that you know what you’re getting if you choose to buy. A lot of machines offer the same core functions, so we tend to focus on what stands out, so rest assured, if we rate a machine highly (as we do with this one), it’s going to be a good all rounder unless we specifically say otherwise.
It would be a mistake to say that there’s no learning curve at all on the E8.  It has one; it’s just not particularly steep.  Sure, there are a lot of settings, and a lot of things you can change, tweak and adjust, but honestly, the hardest part of its operation is going to be changing your preferred drink settings and familiarizing yourself with the way the menus work.
While we can sing the praises of the E6 all day, the fact is that there is a bit of a learning curve with it. The instruction manual can be a little confusing to some people, and setting up your cleaning system can take a while. Also, plan on spending more time with maintenance than you would with other coffee makers. In the end, it ensures that your machine is always ready to go, but it can be a bit of a time investment.
The height of the cappuccino spout for latte macchiato and cappuccino and the coffee spout is continuously adjustable, the creation of perfect specialty drinks both in a small espresso cup and in a latte macchiato glass up to 6 inches tall. The integrated fine foam technology from JURA ensures unique milk foam quality with a fine, feather-light consistency.

Jura does not make any budget-friendly machines, so you should come in expecting to make an investment. Prices range from $800 for a single cup machine, to above $5,000 for Jura’s top of the line model. You can always search for refurbished models, and Jura occasionally offers factory serviced machines that function like new, but have been returned to the company for unspecified reasons.
×