The Jura Super Automatic F50 pump driven espresso machine takes care of everything for the coffee lover with the push of a single button: it grinds the beans, brews the coffee and finally ejects the puck. In fact, due to its various functions, design and overall usability, it’s highly recommended for novice level baristas or people who want to conveniently prepare their coffee. Also, compared to a steam machine, the F50 uses a greater pressure and therefore makes your espresso taste a lot better.

There is a learning curve and one has to get the coffee to water ratio correct for one's preferences...changing it for other drinkers. But it is truly automatic, which is nice for serving more than one person quickly, brews quickly and makes very good coffee. Jura took this machine and rewired it per the wiring recall on this model, returned it, all at no cost to me.
Strength and temperature selection for a precise cup – The unit has four selections for the strength of coffee you want and lets you control the brew temperature for different drinks. This is a great way to customize a cup of coffee for guests and family. Instead of a pot evaporating away on the heater all day, just dial in the strength desired and 60 seconds later, you have your perfect cup of coffee.
Don’t you wish there was an easier way to have café-quality coffee without leaving your house? You know the coffee that makes you smile after every sip. Wouldn’t it be great to have a mini café shop, with you being the number one customer, in your kitchen? The Jura Capresso Impressa coffee machine brings delightful made-to-order coffee prepared for perfection without spending $5 every time. Check out the Jura Capresso Impressa S8.
Like the Sage Express, Panasonic’s NC-ZA1 is a “bean to cup” espresso machine: it takes whole beans, grinds them and pushes hot water through them at pressure to produce a cup of coffee. That’s pretty much where the similarities end, however, because unlike the old-school Express, the NC-ZA1 makes almost the entire process automated – and controllable via touchscreen.

As we continue on our journey of Jura Coffee Makers, the Impressa C65 is another “standard” unit. It doesn’t have all of the accouterments of higher-end models, but it still makes an incredible cup of coffee, and it offers the speed and convenience that you would expect from Jura. Overall, we would compare this model to the ENA 9 above, although this one can make two cups at once.
This machine makes the best coffee I've ever had! No more high priced Starbucks! This is quality coffee/espresso for a fraction of what he cost! Let's do the math......a caffe latte = $4.25 from Starbucks. Let's say you buy one everyday on your way to work. That's 250 lattes a year@ 4.25= Approximately $1100 a year!! Buy an all in one Jura capresso machine and it pays for its self in less than a year! These very well built and made to last! My wife and I absolutely love this machine! This machine is over a decade old and still works like brand new! Add beans water and out comes the best cup of java you will ever have!
Like other Jura machines, the spouts can be adjusted 2.6-4.4” to accommodate any size cup or beverage. We found the adjustable spout really handy in preventing and splashing or spillover onto the machine which limits clean up and also help create the perfect crema. We found the foam that the C65 produced to be incredibly light with almost a light, feather consistency. While the cost of this unit is slightly higher, our calculations had it paying for itself after only a few months. When we tracked the amount of coffee used and compared it to how much it would have been if purchased from a coffee shop, the Jura paid for itself quicker than you might expect. Not to mention these machines are incredibly well built and will last for years before ever needing to be repaired or serviced. And when that time does come, Jura has always been responsive and communicative which makes sending the unit in painless.

What sets the Jura line of coffee machines apart for other similar coffee systems is that it does literally everything you need to do with the touch of a button. When preparing the machine, you simply load it with coffee and water, and if it’s your preference, milk or cream. We were originally concerned about cleaning dairy products out of the Jura as this can be a pain point with other systems. You don’t want dairy leftover in any part of the machine as it turns quickly and can easily ruin upcoming batches of coffee. But with the Jura, you load the milk into an easy to remove and clean stainless steel canister making the clean up super simple.
Hardcore coffee aficionados know what they can expect from the Jura Capresso. The company, formerly known as Capresso Inc., is based in Closter, New Jersey. It is known for the design, manufacture, and sale of coffee equipment. As most Jura coffee machine reviews would tell you, any coffee machine that has the Jura name on it boasts of elegant design and topnotch features.
This hefty Capresso burr grinder is built with a heavy-duty zinc die-cast housing, making it sturdy and reliable. Its large 8-ounce hopper ensures that you won’t be refilling your coffee beans for days. Its burr grinding mechanism produces consistent, uniform grinds in 16 different texture settings, from Turkish at the finest to French press at the coarsest. Because the Capresso 565 has a low RPM, low-heat grinder design, it causes minimal degradation to your coffee beans. 

Jura is a company that well known advancing coffee technology in a way that blends convenience, sophistication, quality and most importantly easy of use into brewing coffee and espresso based beverages in the modern home. Their impressive line of Jura Coffee Makers is the true embodiment of all these values and has been impressing coffee connoisseurs over the last few years with it’s high pressure-brewed- coffee, espressos, cappuccinos and lattes.
To enable the filter and coffee machine to communicate, JURA uses modern RFID technology. Any machine fitted with the intelligent water system (I.W.S.®) recognises when a filter is inserted, automatically switches to filter mode and starts the rinsing process. When the filter capacity is nearly used up the machine prompts the user to change the filter. If the filter is not changed, the machine activates descaling mode. After a certain amount of use, the user is prompted to descale the machine. This can only be done when the filter is removed, so there is no more risk of user error resulting from misunderstandings.
The new Gaggia Brera is a very impressive super automatic espresso machine that has a small form factor, making it perfect for use on small kitchen countertops. Not only that, but it seems that the company has focused, among other things, to ensure that the Brera fully maximizes user convenience. For instance, the water tank, drop tray and the dregs drawer are all within reach and can be easily accessed from the machine for simple, swift maintenance and regular cleaning. With this model, beverage selection and machine programming has been greatly simplified, allowing users to easily navigate through the options which are certainly more than you’d expect from such a small machine.
09/16/2010 - The C1000 finally gave out after 10+ years and service fees of $250. With all lights now flashing and the loudest grinding noise ever, it was confirmed today with Jura-Capresso Customer Service that this unit is not worth their new $250 service fee to repair (if it could be repaired). I still found the C1000 a great appliance and Jura-Capresso a very reputable company. From a cost-analysis perspective (and these are ONLY estimates), I consume about 700 cups per year which requires about 20 pounds of beans at $10 per pound (Fresh Market) or $200 per year. Ten years worth of coffee beans cost about $2,000. Add the $900 cost of the C1000, plus two $125 service fees, my total investment was around $3,150. I excluded the cost of water since we pay a minimal fee, but never use the charged amount. Equivalent cups of pressure brewed coffee (about $3 per cup from Starbucks) over this ten year period would cost about $21,000. I compare Starbucks prices since there is a huge quality difference between their pressure-brewed coffee and drip coffee at your local food mart. So my break-even point with the Jura-Capresso C1000 was between one and two years. The remaining eight to nine years of coffee I consumed was at no cost (when compared to Starbucks). This analysis only includes the direct financial cost and not the cost of your time/fuel getting to Starbucks. I happily accepted Jura-Capresso’s "one-time replacement offer" to upgrade my C1000 to a new IMPRESSA C5. The list price is $999, but the upgrade cost is only $600. Although my C1000 unit has experienced problems, it continues to be the most awesome coffee machine ever! Once my IMPRESSA C5 machine arrives and has been used a short time, I will post a new product review.Read full review...
Super automatic espresso machines generally will produce superb macchiato, cappuccino, and chocolate drinks in addition to espresso drinks (such as ristretto). You will pay for the convenience of super automatic, automatic, or semi-automatic espresso machines, but they are a convenient way to produce and re-produce great drinks. Typically, super automatic espresso machines cost from $400 and up. These espresso machines come in multiple styles and sizes. Some automatic espresso machines provide a compact form factor which can attractively sit on a kitchen counter, whereas others are large and best suited to for the truly serious espresso aficionado or as a commercial super automatic espresso machine. The choice is yours.
The Unpleasant: There is hardly anything negative about this sublime machine. Due to its small water reservoir, the Impressa Z7 was not designed for offices or households with multiple coffee drinkers. Furthermore, it may be inconvenient for individuals who drink several cups of coffee throughout the day since that would require frequent refilling of the reservoir. If you’re interested in one with a larger water tank, check out Jura-Capresso S8.
Excellent work horse. We purchased the Jura-Capresso Impressa F9 16 years ago for a wedding present to us and we have never had any issues with it...it's an excellent product. We have sent it back to the maker to have it cleaned a couple of times over the years and the service has been fantastic. Don't let the price throw you off....it's worth every penny.
Due to the lower register of the running motor, the Capresso 503.05 is much quieter than most blade grinders; this machine isn’t likely to wake up your family in the morning. Great build quality and fantastic machining make this one of the most durable blade grinders available.Despite the attractive design, fantastic build quality, and convenient features, this is still just a blade grinder.
4) The coffee and espresso are great. I've learned to make a latte just like Starbuck's and I haven't been back since. Some people complain that the frother doesn't work well, but here's the trick: first, you should use non-fat or low-fat milk. For some reason, lower fat milk froths better every time; second, be sure to clean the frothing nozzle after each use. Kind of a no-brainer, I know. Third, there are two settings on the frother, and you can change the setting by sliding the sleeve on the frothing tip up or down. Experiment with this and you will get the perfect froth, really.

The interface is also very clean and easy to use and given the fact that it also has a function for automatic cleaning, you don’t have to worry about cleaning the machine yourself. However, probably the most notable feature (among others) of the XS90 is the fact that it features a low noise design. What I mean by that is that the burr grinder is perfectly insulated and has the lowest noise grinding of any espresso machine on the market today.


The one-touch approach extends far beyond simply grinding your coffee. Anything that you do with the Jura is going to be accomplished with that original a single button. This is a welcomed departure from other more advanced coffee systems which claim to be one-touch, but require you to do a lot of additional work when making more complicated drinks.
Depending on how often you use your Jura, the machine will prompt you to clean it at regular intervals. For most models this is every 180 cups of coffee. It’s important not to ignore these prompts simply because the longer you wait, the more buildup from the coffee and its oils there will be, and the more the flavor of your coffee will be affected. As with all functions of the Jura, cleaning is extremely simple and is completely hands off.
The ENA Micro 1 is the simplest of all of Jura’s machines. It is the smallest machine on the list, the most affordable, and packed with the base technologies in Jura’s machines. Your beverage begins by grinding whole coffee beans in a multi-level grinder, which are then pushed through a micro brewing unit. The machine delivers a rich espresso, with a soft layer of crema on top.
×