The first machine I received never worked correctly. The milk would not steam and the espresso would start to come out and then stop. Upon stopping a message would display on the screen asking to press a button to fill the pump. This would occur 2-3 times before an expresso could actually be made. I experimented with several different grind settings, coffee strength, water temperatures, etc, but with no success. The machine continued to pump a few drops of espresso, asking to refill the pump, and waste the previous grinds. I literally wasted 2-3 cans of Illy espresso without ever getting espresso. In addition, with each espresso cycle, a large amount of water would precede any espresso. For example on a 1oz shot, about 0.1oz would be water that didn't run through the coffee.


I have had several super automatic coffee machines in the past 10 years. My wife and I are coffee lovers and our favorite time every day is sitting down together when I get home from work and talking over a cup of our favorite coffee. It was our quest, after we were married, to find the perfect way to brew coffee. it couldn't be the french press. We travel with one since most upscale hotels don't have a coffee maker in the room, but at home we want a perfect cup each time and every time! Our journey started with Saeco and I am not hear to bash their products! I've had 5 Saecos and still own 3. One is our backup. One we use when we entertain and need more than one machine and the third is broken. The broken one was our favorite and newest. I cleaned it one day and when I was reinserting the brew group a little piece of plastic broke and poof, there goes the machine. Of course I'll get it fixed, but this is the type of stuff we have always encountered with Saeco! Great machine...cheaply built. I decided that I was upgrading and trying a different brand. After a tremendous amount of research I settled on the Jura F7 refurbished. An almost $2,000 machine for $699 and a warranty. I couldn't see a risk and have had great luck with buying refurbished items. Let me tell you from the moment it arrived it has been the easiest to use machine we've ever owned! Again, I loved our Saeco's, but they are nothing in comparison to the Jura!!! The speed in which it grinds, tamps, brews and cleans is literally 60 seconds. It is so much quieter than Saeco and cleaning does not involve the removal of anything. Open a lid...drop in a cleaning tab...put a large cup under the spout and BAM...it's cleaning. 15 minutes later my machine said "READY"! I pressed a button and out came another perfectly brewed cup of my favorite coffee from a little plantation in Hawaii!
If you are going to try to make other coffees with this machine, plan on doing some trial runs to get it right. Since you can adjust the amount of water and beans, you can make standard coffee if you want, but it’s not going to be as good as the espresso. Overall, we only recommend this to espresso drinkers, but it’s nice to know that you can make other beverages if and when you want a change.
I only have one minor quibble with this machine; if you like cappuccino, it produces foam that is weak and deflates easily. I have troubleshot this problem from every possible angle (tried different percent milkfat, different milks(soy), different milk temps etc.) and the results were still a little disappointing. I purchased the Milk Frothing accessory designed for this unit and still could not produce the more velvety foam I was seeking. The easiest fix for this is to buy an Aerolatte: steam your milk with the F9 (the steam function works great) and then whip till your hearts content with the Aerolatte. For an extra $15 bucks spent on the Aerolatte, you'll have the perfect cup of cappuccino to rival any cafe.
The first thing that comes to mind to anyone who sees the Jura Impressa XS90 is “Wow”. That is because this espresso machine is so amazing, so packed with features and so good at making the perfect espresso, that words fail to describe how incredible it actually is. This is a commercial duty espresso machine that was designed for use in either a restaurant or an office and features the company’s popular 1-touch milk frothing system and 2 independent boilers (stainless steel).
The design of the Giga 5 is beautiful, and the clean lines running up and across the unit make it modern and sophisticated. Due to the fact that the Giga 5 has two grinders, pumps and heating systems, it produces a good amount of internal heat. Jura solves this problem by automatically diverting the heat and steam away from the machine via the visually appealing “venti ports,” which in turn provide fresh air into the system.

Jura has focused on producing espresso machines that provide the utmost in quality and innovation. The company has been making historic products ever since its inception in 1994 for the Espresso and Coffee brewing arena. Jura coffee centers not only deliver superior performance, convenience, and reliability, but are also designed with elegance and style that give each of their espresso coffee machines a rare blend of form and function.
To enable the filter and coffee machine to communicate, JURA uses modern RFID technology. Any machine fitted with the intelligent water system (I.W.S.®) recognises when a filter is inserted, automatically switches to filter mode and starts the rinsing process. When the filter capacity is nearly used up the machine prompts the user to change the filter. If the filter is not changed, the machine activates descaling mode. After a certain amount of use, the user is prompted to descale the machine. This can only be done when the filter is removed, so there is no more risk of user error resulting from misunderstandings.
09/16/2010 - The C1000 finally gave out after 10+ years and service fees of $250. With all lights now flashing and the loudest grinding noise ever, it was confirmed today with Jura-Capresso Customer Service that this unit is not worth their new $250 service fee to repair (if it could be repaired). I still found the C1000 a great appliance and Jura-Capresso a very reputable company. From a cost-analysis perspective (and these are ONLY estimates), I consume about 700 cups per year which requires about 20 pounds of beans at $10 per pound (Fresh Market) or $200 per year. Ten years worth of coffee beans cost about $2,000. Add the $900 cost of the C1000, plus two $125 service fees, my total investment was around $3,150. I excluded the cost of water since we pay a minimal fee, but never use the charged amount. Equivalent cups of pressure brewed coffee (about $3 per cup from Starbucks) over this ten year period would cost about $21,000. I compare Starbucks prices since there is a huge quality difference between their pressure-brewed coffee and drip coffee at your local food mart. So my break-even point with the Jura-Capresso C1000 was between one and two years. The remaining eight to nine years of coffee I consumed was at no cost (when compared to Starbucks). This analysis only includes the direct financial cost and not the cost of your time/fuel getting to Starbucks. I happily accepted Jura-Capresso’s "one-time replacement offer" to upgrade my C1000 to a new IMPRESSA C5. The list price is $999, but the upgrade cost is only $600. Although my C1000 unit has experienced problems, it continues to be the most awesome coffee machine ever! Once my IMPRESSA C5 machine arrives and has been used a short time, I will post a new product review.Read full review...
Do you have somebody in the house who drinks decaf? The Delonghi ECAM22110B makes it easy to bypass the grinder function, allowing you to use pre-ground coffee for a quick brew. Or if you prefer the robust taste of freshly ground coffee, the stainless steel low pitch conical burr grinder quickly grinds whole beans for a fresh cup at the push of a button.
If the machine you choose doesn’t have a built-in milk frother, Jura’s Automatic Milk Frother If you click this link and make a purchase, we earn a commission at no additional cost to you. will prepare cold, warm, or hot milk foam for use in different espresso-based drinks. Operation of the frother is simple (just one touch), and the machine is designed to pair with any Jura coffee machine.
Jura designates a new line of coffee machines whenever a major technological breakthrough is achieved. We will review these technologies in-depth in the following section, and provide more specs when we cover each individual machine. If you see a term that you don’t immediately understand, don’t worry, just reference the glossary in the next section!
Like other Jura machines, the spouts can be adjusted 2.6-4.4” to accommodate any size cup or beverage. We found the adjustable spout really handy in preventing and splashing or spillover onto the machine which limits clean up and also help create the perfect crema. We found the foam that the C65 produced to be incredibly light with almost a light, feather consistency. While the cost of this unit is slightly higher, our calculations had it paying for itself after only a few months. When we tracked the amount of coffee used and compared it to how much it would have been if purchased from a coffee shop, the Jura paid for itself quicker than you might expect. Not to mention these machines are incredibly well built and will last for years before ever needing to be repaired or serviced. And when that time does come, Jura has always been responsive and communicative which makes sending the unit in painless.

You also get programmable push-button controls for milk, hot water and espresso outputs and given the fact that the 1003380 Accademia dispenses great beverages on demand, it’s great for those who don’t like to wait for long before their drink is ready. In total, there are 7 buttons that you can use in order to prepare one of the following drinks hot water, latte macchiato, latte, cappuccino, cafe lungo, cafe and of course, espresso.

×