THE CURE: Once weekly reach up inside with a hot, wet towel, and clean the round disk behind the flap that hangs down. If it jams, unplug and let it cool before turning it on - sometimes you may have to do this several times. It just happened this a.m., and I had to wait 1/2 hour between my 3rd and 4th cup :) The first time it happened, tech support walked me through the cleaning on the phone. The last time was more of a problem, and they shipped me a mailing label for a $245 complete rebuild, but I didn't have to use it.
The buttons of the Jura XS90 can be easily programmed for setting volume, strength and temperature of the espresso dispensed. If you take a closer look at the right side of the XS90, you’ll notice that the multi function button is perfect for programming the lattes or cappuccino, including the strength and amount of milk, but also the temperature of espresso dispensed. If you want, then you can even adjust the milk’s foaminess.
As a home barista, you need to master all the above techniques to get the right espresso. If you make a little mistake you compromise your shot. As a result, you’ll get an average shot. Even if you know what it takes to get your shot right, there is very little room for error. Failed shots are pretty common with beginner baristas. You probably noticed in coffee shops that the shot differs from barista to barista.
After much research and agonizing indecesion, I finally purchased the Jura J9 Super Automatic coffee machine. Our DeLonghi lasted several years, then died a noisy death. We had enjoyed it, but I felt like there were better machines to be had, so I focused on Jura and Saeco. I decided I wanted a Jura because of the easier cleaning, as reported by some reviewers, as well as great flavor and crema in the coffee. Then picking the model became hard. Not a lot of info on the Jura website as to how the different models work, but I finally decided that I liked the price range and capabilities of the J models. Costco had a J80 to sell, as well as a F7. I love the confidence I can have when buying from Costco, and that would have been a big plus for me. The J80 had been on sale for $400 off a few days before our DeLonghi failed, so I missed the sale and I couldn't bring myself to pay their full price of $2400 for a model that was not listed on the Jura website and some people suggested was an older model. I even emailed Costco, hoping they might honor the sale price, but no go. I finally found a J9 on Amazon for $2000, and read reviews where purchasers reassured me that, if something went wrong, I could feel secure in knowing that Amazon and its sellers would take good care of me and fix or replace the machine fairly quickly. I couldn't tell from the description if this was a J9 or J9.3, but decided it didn't matter. The model I received was the J9.3. It came quickly and the box was in great shape.
Strength and temperature selection for a precise cup – The unit has four selections for the strength of coffee you want and lets you control the brew temperature for different drinks. This is a great way to customize a cup of coffee for guests and family. Instead of a pot evaporating away on the heater all day, just dial in the strength desired and 60 seconds later, you have your perfect cup of coffee.
This super-automatic Jura Capresso ENA 5 coffee machine does produce a tasty cup of coffee, no doubt about it. But we are concerned about its ability to hold up under pressure (literally, with flying milk nozzles!). For the kind of cash that this machine requires, most customers would likely be happier with another Jura model (the S9, perhaps) or another brand of super-automatic coffee machine.
I have had a Capresso C3000 super automatic for many years that I was starting to have some minor problems with (small water leak, tray sensors corroding) and decided it was time to get a replacement. I work from home and tend to drink coffee most of the day so I'm looking for something that works reliably and for a very extend period of time. I started looking at the new super automatics from the Jura Capresso based on the longevity of the old C3000. I will admit, it's the TFT display that really caught my eye on this one. I started looking thinking that I'd end up with a Z series, but the TFT display was what veered me over to this one.
I have had several super automatic coffee machines in the past 10 years. My wife and I are coffee lovers and our favorite time every day is sitting down together when I get home from work and talking over a cup of our favorite coffee. It was our quest, after we were married, to find the perfect way to brew coffee. it couldn't be the french press. We travel with one since most upscale hotels don't have a coffee maker in the room, but at home we want a perfect cup each time and every time! Our journey started with Saeco and I am not hear to bash their products! I've had 5 Saecos and still own 3. One is our backup. One we use when we entertain and need more than one machine and the third is broken. The broken one was our favorite and newest. I cleaned it one day and when I was reinserting the brew group a little piece of plastic broke and poof, there goes the machine. Of course I'll get it fixed, but this is the type of stuff we have always encountered with Saeco! Great machine...cheaply built. I decided that I was upgrading and trying a different brand. After a tremendous amount of research I settled on the Jura F7 refurbished. An almost $2,000 machine for $699 and a warranty. I couldn't see a risk and have had great luck with buying refurbished items. Let me tell you from the moment it arrived it has been the easiest to use machine we've ever owned! Again, I loved our Saeco's, but they are nothing in comparison to the Jura!!! The speed in which it grinds, tamps, brews and cleans is literally 60 seconds. It is so much quieter than Saeco and cleaning does not involve the removal of anything. Open a lid...drop in a cleaning tab...put a large cup under the spout and BAM...it's cleaning. 15 minutes later my machine said "READY"! I pressed a button and out came another perfectly brewed cup of my favorite coffee from a little plantation in Hawaii!
With the Impressa C9, you get programmed beverage buttons for espresso, cappuccino, coffee, hot water or milk. A 14oz. milk container is included and a burr grinder is built-into the machine. The 64-ounce removable water tank is easy to clean, and the ThermoBlock heating system keeps water at the optimal temperature. With an 18-bar power pump, this machine brews fantastic espresso.
4) The coffee and espresso are great. I've learned to make a latte just like Starbuck's and I haven't been back since. Some people complain that the frother doesn't work well, but here's the trick: first, you should use non-fat or low-fat milk. For some reason, lower fat milk froths better every time; second, be sure to clean the frothing nozzle after each use. Kind of a no-brainer, I know. Third, there are two settings on the frother, and you can change the setting by sliding the sleeve on the frothing tip up or down. Experiment with this and you will get the perfect froth, really.
One of the essential selling points of this coffee maker is that it comes with two grinders. This allows you to mix and match between different beans, such as if you want to have regular or decaf as an option. The grinders themselves are also better than anything else that Jura offers. Instead of metal, they are ceramic, which not only means that they last longer, but they are much quieter.
You also get programmable push-button controls for milk, hot water and espresso outputs and given the fact that the 1003380 Accademia dispenses great beverages on demand, it’s great for those who don’t like to wait for long before their drink is ready. In total, there are 7 buttons that you can use in order to prepare one of the following drinks hot water, latte macchiato, latte, cappuccino, cafe lungo, cafe and of course, espresso.